multisim 12 how to have multimeter measure resistance

Place the black lead first on the lowest voltage point such as the ground.Insert the red probe into the socket having V on it. Some meters have a dedicated socket for voltage while some have a combined socket for V-Amp-Ω. The red probe must be inserted into its correct socket.Insert the black probe into the COM (common) socket.If the voltage is unknown, set the dial to the highest voltage range.

If there is the availability of range selection (some meters have auto range mode for selecting range based on the reading), set the range to the largest expected value.While the DC voltage remains constant having fixed polarity.

The AC voltage swaps polarity continuously, therefore it does not have specific polarity.

Voltage can be either alternating AC or direct DC. The difference of electrical potential between two points is known as voltage or potential difference. In this multimeter tutorial, we will measure the AC and DC Voltage using DMM and analog multimeter with step by step guide. They can be used to check for continuity in wires, fuses, circuit breakers, resistors and other damaged components.

Avoid Probes from Placing in Amp SocketĪ multimeter (also know as AVO meter (Amp-Volt-Ohm Meter) is a device that is used for the measurement of different electrical quantities such as voltage, current, resistance, capacitance, transistors, diodes and temperature, etc.

Measuring DC Voltage using Analog Multimeter:.

Measuring DC Voltage using Digital Multimeter:.

Measuring AC Voltage using Analog Multimeter:.

Measuring AC Voltage using Digital Multimeter:.

Multisim 12 how to have multimeter measure resistance